A secure, low profile hanger designed for the fast installation and easy adjustment of polyester fibre acoustic panels.
Suspension solutions designed to save you time, money and labour by improving the efficiency of the installation process. Fitting directly into acoustic baffles, panels, uPVC frames and suspended ceilings, these kits require no on-site cutting or filing, offer enormous time-saving benefits and present a discreet, professional finish.Enquire Now
The Gripple® range of acoustic solutions are manufactured in the United Kingdom, and have been designed to save you time, money and labour by improving the efficiency of the installation process. Unlike traditional methods, Gripple kits require no on-site cutting, filing or use of uPVC frames, so offer enormous time-saving benefits for your project.
Gripple products can fit directly into acoustic baffles and panels, uPVC frames and suspended ceilings, offering a sleek, professional and discreet finish, without compromising on strength. All products are supplied in ready-to-use kits with your choice of end fixing and wire rope length.
Easily fitted directly into concrete and other base materials, designed for use with No.2 M8 Barrel.
The Beam, Flange & Purlin Clips are ideal for attaching Gripple hangers when access or drilling restrictions occur.
Lightweight tool designed to tension 6 mm wire rope installations with ease.
Ideal for attaching a D6 or 3 mm Catenary (CTI) Kit to a concrete wall or wooden beam.
Developed for the quick fastening of cable basket to Gripple Fast Trak, Universal Bracket and G Bracket.
Handy ceiling clip solution for use when fixing into concrete substrates.
Screws into wood. Ideal for use with Loop end fixing.
Decorative kit for use with Gripple No. 1 in retail or office environments.
Easy-fit slotted / hex head screw suitable for wood and non-cracked concrete.
Cracked Concrete Ring Anchor, suitable for cracked and non-cracked concrete.
Developed for the quick fastening of cable tray to Gripple Universal Bracket, Fast Trak and G Bracket.
Aesthetic, snap-fit cover to protect the Gripple fastener from paint.
Punch-activated Drop-In Anchor for fixing into cracked and non-cracked concrete, and hollow core ceiling slabs.
Punch to assist the secure and correct installation of Drop-In Anchors.
Available in various sizes, overall lengths and thread lengths for a variety of applications.
Setting key with keyring attachment, for the adjustment of Gripple Hangers.
Allows the linking of two G-Brackets, with a distance of 300 mm to separate both electrical and data cables.
Ideal for clamping onto an I-Beam when it’s not possible to loop around with the catenary wire.
Ideal for fixings to luminaires, drop-in anchors and other products with a 6 mm, 8 mm or 10 mm hole.
Designed to lock quickly and securely into the re-entrant channel of decking profiles.
For use with hammer action drill to secure Drop-In Anchors.
For fast and secure fixing of hangers with a Loop End Fixing.
Black plastic sleeve tubing for reducing the risk of condensation.
A flexible accessory for attachment to Gripple No. 2 and No. 3 wire rope, for spreading the load of various suspended services.
Ideal for use with the Stud End Fixing for suspending various mechanical and electrical services.
M6 T-Bar Twist Clip for supporting fixings below the ceiling grid.
Available in two sizes to accommodate a wide variety of flange thicknesses.
Ideal for use with Gripple Standard Hanger kits for cold room panels.
Innovative system for securing tail wires, ideal for use in areas where services are exposed.
Designed for use with Gripple Universal Brackets for fixing directly to steel I-Beams.
Fast and simple method for attaching to a variety of decking profiles.
Stainless Steel anchor, easily fitted into concrete, for use with Gripple hanger sizes No.1 and No.2.
Improves ease of installation of Gripple Concrete Wire Anchors.
The Gripple Torq Tensioning Tool is a wire tensioner tool that regulates the load applied to it.
Neatly hide tracks to further enhance the aesthetics of the Fast Trak® system.
Designed for vibration reduction when installing rectangular ducting on Fast Trak™ and Universal Brackets.
Ideal for use with InvisiGrip 1.5 mm clear filament, or soft copper cores up to 2 mm.
Ideal for blind fixing into one side of a steel beam or for creating an intermediate suspension point in catenary applications
"The Gripple system proved invaluable on two counts. Firstly, providing an innovative solution not only to a construction problem but to the critical acoustics issue and secondly, the speed of installation was key to meeting deadlines."
Project Manager - RKC