UniGrip – Standard Wire Suspension for Slotted Channel or Strut

SKU # UGC

Snap in and suspend. UniGrip Standard is purpose-built for a 41x41 mm channel, enabling fast, tool-free installation directly into standard strut.

Max Working Load

Max Working Load:

250 kg

Wire Compatibility

Wire Compatibility:

2 mm, 3 mm and 4.75 mm

Suspension Drop Lengths

Suspension Drop Lengths:

1 – 10 m (additional drops available on request)

Enquire Now

Product Downloads

UniGrip Standard - Technical Data Pack - ENGUniGrip - Lloyds Approval
View all downloads
UniGrip – Standard Wire Suspension for Slotted Channel or Strut
SKU # UGC
1
1

Fast, Safe and Efficient Wire Suspension for Slotted Strut and Channel

UniGrip Standard is purpose-built for seamless integration with 41×41 mm channel, making it the ideal choice for trapeze bracket suspension.

Its tool-free connection simplifies installation, while the central wire exit ensures you can construct multi-tiered setups with ease.

Whether you’re suspending cable containment, ductwork, or electrical services, UniGrip Standard delivers a clean, efficient alternative to traditional rod-and-strut systems.

Available in three load-rated sizes: 55 kg, 110 kg, and 250 kg, it’s a versatile solution for a wide range of applications. Designed for speed, precision, and compatibility, UniGrip Standard helps you build smarter, faster, and neater from the ground up.

Read More
Fast, Tool-free Connection

Fast, Tool-free Connection

Quickly connect to slotted strut or channel using the tool-free fixing.

High Working Loads

High Working Loads

With safe working loads up to 250 kg per suspension point, UniGrip is ideal for both light and heavy duty suspension projects.

Speed and Convenience

Speed and Convenience

UniGrip systems eliminate cutting, require minimal tools, and offer tool-free adjustment, making them quicker and easier to install than threaded rod or traditional wire methods. Even for first-time users.

Lockable Adjustment

Lockable Adjustment

Simple to use release button allows you to adjust drop height and when you're done just screw down to lock in place and prevent tampering.

Technical and Engineering Support

Technical and Engineering Support

Our technical and engineering teams are on hand from start to finish to provide project engineering drawings, take-offs, on-site inspections, training and support where needed.

Improved Health and Safety

Improved Health and Safety

Our wire suspension kits minimise time spent working at height and with power tools, and eliminates the need for hot works permits, helping your teams work safer and stay compliant.

Fast, Tool-free Connection

Fast, Tool-free Connection

Quickly connect to slotted strut or channel using the tool-free fixing.

High Working Loads

High Working Loads

With safe working loads up to 250 kg per suspension point, UniGrip is ideal for both light and heavy duty suspension projects.

Speed and Convenience

Speed and Convenience

UniGrip systems eliminate cutting, require minimal tools, and offer tool-free adjustment, making them quicker and easier to install than threaded rod or traditional wire methods. Even for first-time users.

Lockable Adjustment

Lockable Adjustment

Simple to use release button allows you to adjust drop height and when you're done just screw down to lock in place and prevent tampering.

Technical and Engineering Support

Technical and Engineering Support

Our technical and engineering teams are on hand from start to finish to provide project engineering drawings, take-offs, on-site inspections, training and support where needed.

Improved Health and Safety

Improved Health and Safety

Our wire suspension kits minimise time spent working at height and with power tools, and eliminates the need for hot works permits, helping your teams work safer and stay compliant.

Range Variants

UniGrip Standard comes in three size variants, allowing for suspension of a range of services.

Load Rating Safety Factor Wire Size
UniGrip 2 55 kg 5:1 2.0 mm
UniGrip 3 110 kg 5:1 3.0 mm
UniGrip 4 250 kg 5:1 4.75 mm

How it works:

See how our UniGrip Standard works below, or download the Technical Data Pack for full install recommendations.

 UniGrip Standard – Technical Data Pack – ENG
Step 1: Remove the circular pin from the top of the hanger.
Step 2: Insert the UniGrip hanger into your strut so the top protrudes out of the slot.
Step 3: Secure in place by re-attaching the pin.
Step 4: Feed the wire into the entry channel at the top of the UniGrip and then back out of the other side. This then grips and locks the wire in place.
Step 5: Push down the end cap to allow adjustment up and down the wire.
Step 6: Screw down the top end cap to prevent accidental adjustment once installed.

Ready To Install
Suspension Kit

We supply UniGrip hangers as a ready to install suspension kit comprised of three parts.

End Fixing Your Substrate Fixing
Wire Your Pre-cut and Fused Wire
Hanger Your Hanger
+

1 Substrate Fixing   (End Fixing)

All our suspension kits come with a wide range of substrate fixings designed to work with a variety of substrates and fixing points.
Discover which substrate fixings are available with this product below:

Loop

Hanger using a non-invasive, simple, choke knot technique

Safe Working Load: 325 kg
Available Sizes:
No. 1 : 1.5 mm
No. 2: 2.0 mm
No. 3: 3.00 mm
No. 4: 4.75 mm
No. 5: 6.00 mm

*System working load based on product and substrate fixing combined

View Substrate Fixing

Stud

Ideal for anchoring into concrete ceilings.

Safe Working Load: 250 kg
Available Sizes:
No.1: 1.5 mm (Wire Diameter)
No.2: 2 mm (Wire Diameter)
No.3: 3 mm (Wire Diameter)
No.4: 4.75 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing

Straight Eyelet

Suitable for a variety of applications that require bolting to brackets or fixtures.

Safe Working Load: 110 kg
Available Sizes:
No.1: 1.5 mm (Wire Diameter)
No.2: 2 mm (Wire Diameter)
No.3: 3 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing

45° Eyelet

For attachment to a variety of substrates using suitable fixings.

Safe Working Load: 110 kg
Available Sizes:
No.2: 2 mm (Wire Diameter)
No.3: 3 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing

90° Eyelet

For fixing into concrete, steel or wood, using gas or power actuated tools, or appropriate screws.

Safe Working Load: 110 kg
Available Sizes:
No.1: 1.5 mm (Wire Diameter)
No.2: 2 mm (Wire Diameter)
No.3: 3 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing

Multiwedge 2

For quick and secure locking into Kingspan Multideck 60 and 80 decking.

Safe Working Load: 90 kg
Available Sizes:
No.2: 2 mm (Wire Diameter)
No.3: 3 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing

MF Wedge

For the suspension of services from Metfloor® 60 and 80 profiles manufactured by Composite Metal Flooring

Safe Working Load: 90 kg
Available Sizes:
No.2: 2 mm (Wire Diameter)
No.3: 3 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing

Alphawedge

Designed for use with Ribdeck E60.

Safe Working Load: 90 kg
Available Sizes:
No.2: 2 mm (Wire Diameter)
No.3: 3 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing

Toggle

For fastening through profile roof cladding, light fittings and other cavities.

Safe Working Load: 110 kg
Available Sizes:
No.1: 1.5 mm (Wire Diameter)
No.2: 2 mm (Wire Diameter)
No.3: 3 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing

TR60 Wedge

Ideal for the suspension of services from Structural Metal Decks TR60+ and TR80+

Safe Working Load: 90 kg
Available Sizes:
No. 2: 2 mm (Wire Diameter)
No. 3: 3 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing

Ring Anchor

Set directly into cracked or non-cracked concrete with a hammer. Ideal for the fast suspension of services including electrical, HVAC and pipework.

Max Safe Working Load: 55 kg
Available Sizes:
No.1: 1.5 mm (Wire Diameter)
No.2 : 2 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing

Ceiling Anchor

Ideal for fixing Gripple hangers into concrete by knocking into a pre-drilled hole. Pull with a claw hammer to set.

Max Safe Working Load: 45 kg
Available Sizes:
No.1: 1.5 mm (Wire Diameter)
No.2: 2 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing

Channel Nut

Designed specifically for use with channel, to suspend all types of building services.

Safe Working Load: 250 kg
Available Sizes:
No.2: 2 mm (Wire Diameter)
No.3: 3 mm (Wire Diameter)
No.4: 4.75 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing

Shotfire

A shot-fired hanger solution with pre-mounted nail end fixing, for securing installation into concrete or composite metal decking.

Safe Working Load: 15 kg
Available Sizes:
No.1: 1.5 mm (Wire Diameter)
No.2: 2 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing

18mm Decking Wedge

Designed for use with Ribdeck S60 and Ribdeck 80

Safe Working Load: 90 kg
Available Sizes:
No.2: 2 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing

25mm Decking Wedge

Designed for use with SMD R51, Comflor 51, Holorib, Multideck 50 and Metfloor 55.

Safe Working Load: 90 kg
Available Sizes:
No.2: 2 mm (Wire Diameter)
No.3: 3 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing
Snap Hook - 1 Snap Hook - 1

Snap Hook

Ideal for attachment to cable basket, purlin clips and light fittings.

Safe Working Load: 90 kg
Available Sizes:
No. 1: 1.5 mm
No. 2: 2.0 mm
No. 3: 3.00 mm

*System working load based on product and substrate fixing combined

View Substrate Fixing

Top Hat

Aesthetic fixing for use with a wide range of Gripple hangers

Safe Working Load: 55 kg
Available Sizes:
No.1: 1.5 mm (Wire Diameter)
No.2: 2 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing
Snap Hook - 4 Snap Hook - 4

Barrel

Ideal for use on signage, or exposed services, such as retail and office environments.

Safe Working Load: 55 kg
Available Sizes:
No.1: 1.5 mm (Wire Diameter)
No.2: 2 mm (Wire Diameter)
No.3: 3 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing

2 Wire Length

From 1 – 10 m

(Other lengths available on request)

All our ready‑to‑install suspension kits include pre‑cut, looped, and fused wire in your chosen length. Standard options are available from 1 – 10 m.

3

UniGrip Standard

Designed specifically to connect to a standard 41 x 41 channel tool free.

Ideal for trapeze bracket suspension with standard channel or strut. Central wire exit allows for easy installation of multi-tiered trapeze brackets.

(Not compatible with Gripple Universal Bracket)

  • Max Working Load: 250 kg
  • Wire Compatibility: 2.00 mm, 3.00 mm, 4.75 mm
  • Suspension Drop Lengths: 1 – 10 m (additional drops available on request)

Have you found what you are looking for?

Contact our Gripple experts for technical advice or project assistance or use our additional resources.

Speak To An ExpertGet Technical Support
1
1

UniGrip – Standard

SKU # UGC

Snap in and suspend. UniGrip Standard is purpose-built for a 41×41 mm channel, enabling fast, tool-free installation directly into standard strut.

Key Specifications

Max Working Load: 250 kg
Wire Compatibility: 2 mm, 3 mm and 4.75 mm
Suspension Drop Lengths: 1 – 10 m (additional drops available on request)

Available Sizes

No.2: 55 kg
No.3: 110 kg
No.4: 250 kg
Find a SupplierView Product Page

Product Downloads

UniGrip Standard – Technical Data Pack – ENGUniGrip – Lloyds Approval

Found what you are looking for?

Contact our Gripple experts for technical advice or project assistance or find a local stockist.

Speak to an ExpertGet Technical Support

Related Products & Accessories

UniGrip – Central Exit

Trapeze Bracket Wire Hanger

Max Working Load: 360 kg
Wire Compatibility: 2, 3, 4.75 and 6 mm
Suspension Drop Length: 1 – 10 m (additional drops available on request)
View Fixing Variant

UniGrip – Side Exit

Direct Equipment Suspension

Max Working Load: 360 kg
Wire Compatibility:: 2 mm, 3 mm and 6 mm
Suspension Drop Lengths: 1 – 10 m (additional drops available on request)
View Fixing Variant

UniGrip Y-Fit

Wire Hanger with Dual Fixing Points

Max Working Load: 110 kg
Leg Length Size Range: 150 mm – 500 mm
Maximum Off Axis Suspension: 15º
View Fixing Variant

UniGrip – QTUB (Quarter Turn)

Outer Hanger for Gripple Universal Bracket

Max Working Load: 110 kg
Wire Compatibility: 2.00 mm and 3.00 mm
Suspension Drop Lengths: 1 – 10 m (additional drops available on request)
View Fixing Variant

UniGrip – QT (Quarter Turn)

Inner Hanger for Gripple Universal Bracket

Max Working Load: 110 kg
Wire Compatibility: 2.00 mm and 3.00 mm
Suspension Drop Lengths: 1 – 10m (additional drops available on request)
View Fixing Variant

UniGrip – Hook

Hook Attachment Wire Hanger

Safe Working Load: 55 kg
Wire Compatibility: 2.00 mm
Suspension Drop Lengths: 1 – 10 m (additional drops available on request)
View Fixing Variant
Core Products Assets & Collateral Untitled design - 1

UniGrip – Phenolic Adaptor

Push-Fit Duct Hanger

Safe Working Load:: 15 kg
Wire Compatibility: : 2.00 mm
Suspension Drop Lengths:: 1 – 10m (additional lengths available on request)
View Fixing Variant

UniGrip – Calibra

UniGrip Calibra | Height Adjustable Hook Fixing Hanger

Safe Working Load: 55 kg
Wire Compatibility: 2 mm
Suspension Drop Lengths: 1 – 10m (additional drops available on request)
View Fixing Variant

UniGrip – Cable Basket Adaptor

Direct-fix Cable Basket Hanger

Max Working Load: 55 kg
Wire Compatibility: 2 mm
Suspension Drop Lengths: 1 – 10 m (additional drops available on request)
View Fixing Variant

Universal Clamp QT – (Quarter Turn Height Adjustable)

Height Adjustable Pipe Clamp for Gripple Brackets

Max Load Rating: 75 kg
Maximum Pipe Diameter: 150 mm
Noise Reduction: > 23 dB (depending on variant)
View Product

Universal Clamp QT – (Quarter Turn)

Adjustable Pipe Clamp for Gripple Brackets

Max Load Rating: 75 kg
Maximum Pipe Diameter: 150 mm | 6 in
Noise Reduction: > 23 dB (depending on variant)
View Product

Universal Clamp – Threaded M8 / M10

Adjustable Pipe Clamp

Max Load Rating : 75 kg
Maximum Pipe Diameter: 150 mm | 6 in
Noise Reduction: > 23 dB (depending on variant)
View Product

Quarter Turn Conduit Clamp

Conduit Clamp for Gripple Brackets

Safe Working Load: 105 kg
Conduit Compatibility: from 12.5 mm to 100 mm
QT Bracket Compatibility: Fast Trak, Universal and Low Profile Gripple Brackets
View Product

Quarter Turn Trunking Clamp

Trunking Clamp for Gripple Brackets

Safe Working Load: Up to 50 kg
Sizes available: 50 x 50 mm, 75 x 75 mm, 100 x 100 mm and 150 x 150 mm
Gripple Bracket Compatibility: Fast Trak, Universal Bracket and Low Profile Bracket
View Product

Common Applications

HVAC Equipment

Pipework

Cable Containment

Busbar & Busduct

Ductwork

Combined Modules

Exhibition Rigging

HVAC Equipment

Pipework

Cable Containment

Busbar & Busduct

Ductwork

Combined Modules

Exhibition Rigging

Related Downloads

UniGrip Range Technical Data Pack – ENG
UniGrip Standard – Technical Data Pack – ENG
UniGrip – Lloyds Approval
Building Services Product Guide

Contact the Gripple Experts

Enquire Now

"*" indicates required fields

*
We’d love to stay in touch with info we think you’ll find useful?*

See our Privacy Policy here for more details.

Got a question or need help choosing the right products for your next project? Get in touch and our expert team is here to offer tailored advice and technical support.

UK Sales

Contact dedicated UK sales and distributor support team.

HQ & Export Sales

Contact our UK head office and export sales team.

Technical Support

Contact our UK technical team for project or product advice or support.