UniGrip – Phenolic Adaptor Push-Fit Duct Hanger

SKU # UG*-PA

UniGrip Phenolic Adaptor is the specialist suspension solution for phenolic and PIR ductwork, installed in seconds with a secure push-fit.

Safe Working Load:

Safe Working Load::

15 kg

Wire Compatibility:

Wire Compatibility: :

2.00 mm

Suspension Drop Lengths:

Suspension Drop Lengths::

1 – 10m (additional lengths available on request)

Enquire Now

Product Downloads

UniGrip Phenolic Adaptor Technical Data Pack - ENGUniGrip - Lloyds Approval
View all downloads
UniGrip – Phenolic Adaptor Push-Fit Duct Hanger
SKU # UG*-PA
1
1
1
1

Purpose-Built for Phenolic and PIR Ductwork

UniGrip Phenolic Adaptor is designed specifically for attaching to phenolic and PIR fabricated rectangular ductwork.

Its push-fit design enables fast, tool-free installation directly into the duct surface or bracket, making it ideal for tight timelines and clean installs.

It also supports vapour sealing using aluminium tape, ensuring airtight performance where needed.

When you’re working on ductwork, UniGrip Phenolic Adaptor delivers a reliable, easy-to-install suspension solution.

Push Fit Duct Installation

Push Fit Duct Installation

Quickly attach to phenolic ductwork with an easy push fit install.

Vapour Sealed

Vapour Sealed

Simply apply aluminium tape over the fixing for a reliable vapour seal.

Speed and Convenience

Speed and Convenience

UniGrip systems eliminate cutting, require minimal tools, and offer tool-free adjustment, making them quicker and easier to install than threaded rod or traditional wire methods. Even for first-time users.

Technical and Engineering Support

Technical and Engineering Support

Our technical and engineering teams are on hand from start to finish to provide project engineering drawings, take off’s, on-site inspections, training and support where needed.

Lockable Adjustment

Lockable Adjustment

Simple to use release button allows you to adjust drop height and when you're done just screw down to lock in place and prevent tampering.

Improved Health and Safety

Improved Health and Safety

Our wire suspension kits minimize time spent working at height and with power tools, and eliminates the need for hot works permits, helping your teams work safer and stay compliant.

Push Fit Duct Installation

Push Fit Duct Installation

Quickly attach to phenolic ductwork with an easy push fit install.

Vapour Sealed

Vapour Sealed

Simply apply aluminium tape over the fixing for a reliable vapour seal.

Speed and Convenience

Speed and Convenience

UniGrip systems eliminate cutting, require minimal tools, and offer tool-free adjustment, making them quicker and easier to install than threaded rod or traditional wire methods. Even for first-time users.

Technical and Engineering Support

Technical and Engineering Support

Our technical and engineering teams are on hand from start to finish to provide project engineering drawings, take off’s, on-site inspections, training and support where needed.

Lockable Adjustment

Lockable Adjustment

Simple to use release button allows you to adjust drop height and when you're done just screw down to lock in place and prevent tampering.

Improved Health and Safety

Improved Health and Safety

Our wire suspension kits minimize time spent working at height and with power tools, and eliminates the need for hot works permits, helping your teams work safer and stay compliant.

How it Works:

See how our UniGrip Phenolic Adaptor works below or download the Technical Data Pack for full installation guidance.

 UniGrip Phenolic Adaptor Technical Data Pack – ENG
1, Push-fit each fixing directly into the duct.
2. Feed the wire into the entry channel at the top of the UniGrip and then back out of the other side, leaving at least 100mm. This then grips and locks the wire in place.
3. Push down the end cap to allow adjustment up and down the wire.
4. Screw down the top end cap to prevent accidental adjustment once installed.

Ready To Install
Suspension Kit

We supply UniGrip Phenolic Adaptor hangers as a ready to install suspension kit comprised of three parts.

End Fixing Your Substrate Fixing
Wire Pre-cut and Fused Wire
Hanger Your Hanger
+

1 Substrate Fixing   (End Fixing)

All our suspension kits come with a wide range of substrate fixings designed to work with a variety of substrates and fixing points.
Discover which substrate fixings are available with this product below:

18mm Decking Wedge

Designed for use with Ribdeck S60 and Ribdeck 80

Safe Working Load: 90 kg
Available Sizes:
No.2: 2 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing

25mm Decking Wedge

Designed for use with SMD R51, Comflor 51, Holorib, Multideck 50 and Metfloor 55.

Safe Working Load: 90 kg
Available Sizes:
No.2: 2 mm (Wire Diameter)
No.3: 3 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing

45° Eyelet

For attachment to a variety of substrates using suitable fixings.

Safe Working Load: 110 kg
Available Sizes:
No.2: 2 mm (Wire Diameter)
No.3: 3 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing

90° Eyelet

For fixing into concrete, steel or wood, using gas or power actuated tools, or appropriate screws.

Safe Working Load: 110 kg
Available Sizes:
No.1: 1.5 mm (Wire Diameter)
No.2: 2 mm (Wire Diameter)
No.3: 3 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing

Alphawedge

Designed for use with Ribdeck E60.

Safe Working Load: 90 kg
Available Sizes:
No.2: 2 mm (Wire Diameter)
No.3: 3 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing

Ceiling Anchor

Ideal for fixing Gripple hangers into concrete by knocking into a pre-drilled hole. Pull with a claw hammer to set.

Max Safe Working Load: 45 kg
Available Sizes:
No.1: 1.5 mm (Wire Diameter)
No.2: 2 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing

Channel Nut

Designed specifically for use with channel, to suspend all types of building services.

Safe Working Load: 250 kg
Available Sizes:
No.2: 2 mm (Wire Diameter)
No.3: 3 mm (Wire Diameter)
No.4: 4.75 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing

Loop

Hanger using a non-invasive, simple, choke knot technique

Safe Working Load: 325 kg
Available Sizes:
No. 1 : 1.5 mm
No. 2: 2.0 mm
No. 3: 3.00 mm
No. 4: 4.75 mm
No. 5: 6.00 mm

*System working load based on product and substrate fixing combined

View Substrate Fixing

MF Wedge

For the suspension of services from Metfloor® 60 and 80 profiles manufactured by Composite Metal Flooring

Safe Working Load: 90 kg
Available Sizes:
No.2: 2 mm (Wire Diameter)
No.3: 3 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing

Multiwedge 2

For quick and secure locking into Kingspan Multideck 60 and 80 decking.

Safe Working Load: 90 kg
Available Sizes:
No.2: 2 mm (Wire Diameter)
No.3: 3 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing

Shotfire

A shot-fired hanger solution with pre-mounted nail end fixing, for securing installation into concrete or composite metal decking.

Safe Working Load: 15 kg
Available Sizes:
No.1: 1.5 mm (Wire Diameter)
No.2: 2 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing

Stud

Ideal for anchoring into concrete ceilings.

Safe Working Load: 250 kg
Available Sizes:
No.1: 1.5 mm (Wire Diameter)
No.2: 2 mm (Wire Diameter)
No.3: 3 mm (Wire Diameter)
No.4: 4.75 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing

Straight Eyelet

Suitable for a variety of applications that require bolting to brackets or fixtures.

Safe Working Load: 110 kg
Available Sizes:
No.1: 1.5 mm (Wire Diameter)
No.2: 2 mm (Wire Diameter)
No.3: 3 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing

Toggle

For fastening through profile roof cladding, light fittings and other cavities.

Safe Working Load: 110 kg
Available Sizes:
No.1: 1.5 mm (Wire Diameter)
No.2: 2 mm (Wire Diameter)
No.3: 3 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing

Twist Clip

Ideal for hanging from suspended ceiling T-Bar, signage, acoustic baffles or luminaires.

Safe Working Load: Refer to hanger load ratings and safe working loads
Available Sizes:
No.1: 1.5 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing
Snap Hook - 1 Snap Hook - 1

Snap Hook

Ideal for attachment to cable basket, purlin clips and light fittings.

Safe Working Load: 90 kg
Available Sizes:
No. 1: 1.5 mm
No. 2: 2.0 mm
No. 3: 3.00 mm

*System working load based on product and substrate fixing combined

View Substrate Fixing

Top Hat

Aesthetic fixing for use with a wide range of Gripple hangers

Safe Working Load: 55 kg
Available Sizes:
No.1: 1.5 mm (Wire Diameter)
No.2: 2 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing
Snap Hook - 4 Snap Hook - 4

Barrel

Ideal for use on signage, or exposed services, such as retail and office environments.

Safe Working Load: 55 kg
Available Sizes:
No.1: 1.5 mm (Wire Diameter)
No.2: 2 mm (Wire Diameter)
No.3: 3 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing

2 Wire Length

From 1 – 10 m

(Other lengths available on request)

All our ready‑to‑install suspension kits include pre‑cut, looped, and fused wire in your chosen length. Standard options are available from 1 – 10 m.

3

UniGrip Phenolic Adaptor

UniGrip Phenolic Adaptor is the specialist suspension solution for phenolic and PIR ductwork, installed in seconds with a secure push-fit.

  • Safe Working Load: 15 kg
  • Wire Compatibility: 2.00 mm
  • Suspension Drop Lengths: 1 – 10m (additional drops available on request)

Have you found what you are looking for?

Contact our Gripple experts for technical advice or project assistance or use our additional resources.

Speak To An ExpertGet Technical Support
1
1
1
1

UniGrip – Phenolic Adaptor

SKU # UG*-PA

UniGrip Phenolic Adaptor is the specialist suspension solution for phenolic and PIR ductwork, installed in seconds with a secure push-fit.

Key Specifications

Safe Working Load:: 15 kg
Wire Compatibility: : 2.00 mm
Suspension Drop Lengths:: 1 – 10m (additional lengths available on request)

Available Sizes

No. 2: 15 kg
Find a SupplierView Product Page

Product Downloads

UniGrip Phenolic Adaptor Technical Data Pack – ENGUniGrip – Lloyds Approval

Found what you are looking for?

Contact our Gripple experts for technical advice or project assistance or find a local stockist.

Speak to an ExpertGet Technical Support

Related Downloads

UniGrip – Lloyds Approval
UniGrip Range Technical Data Pack – ENG

Common Applications

Ductwork Suspension

Ductwork Suspension

Related Products

Small Wire Cutters

Ideal for cutting wire rope construction 7×7 or 7×19 from diameter 1.5 mm up to 6 mm.

View Accessory

Trapeze Plus FR – Range

Fire Rated Cable Hanger Tested to F120

Max Working Load: 225 kg
Fire Testing: BRE tested to F120
Available Drop Lengths: 1 – 10 m (bespoke lengths available on request)
View Product

UniGrip – Standard

Wire Suspension for Slotted Channel or Strut

Max Working Load: 250 kg
Wire Compatibility: 2 mm, 3 mm and 4.75 mm
Suspension Drop Lengths: 1 – 10 m (additional drops available on request)
View Fixing Variant

UniGrip – Calibra

UniGrip Calibra | Height Adjustable Hook Fixing Hanger

Safe Working Load: 55 kg
Wire Compatibility: 2 mm
Suspension Drop Lengths: 1 – 10m (additional drops available on request)
View Fixing Variant

UniGrip – Central Exit

Trapeze Bracket Wire Hanger

Max Working Load: 360 kg
Wire Compatibility: 2, 3, 4.75 and 6 mm
Suspension Drop Length: 1 – 10 m (additional drops available on request)
View Fixing Variant

UniGrip – QTUB (Quarter Turn)

Outer Hanger for Gripple Universal Bracket

Max Working Load: 110 kg
Wire Compatibility: 2.00 mm and 3.00 mm
Suspension Drop Lengths: 1 – 10 m (additional drops available on request)
View Fixing Variant

UniGrip Y-Fit

Wire Hanger with Dual Fixing Points

Max Working Load: 110 kg
Leg Length Size Range: 150 mm – 500 mm
Maximum Off Axis Suspension: 15º
View Fixing Variant

UniGrip – Cable Basket Adaptor

Direct-fix Cable Basket Hanger

Max Working Load: 55 kg
Wire Compatibility: 2 mm
Suspension Drop Lengths: 1 – 10 m (additional drops available on request)
View Fixing Variant

Contact the Gripple Experts

Enquire Now

"*" indicates required fields

*
We’d love to stay in touch with info we think you’ll find useful?*

See our Privacy Policy here for more details.

Got a question or need help choosing the right products for your next project? Get in touch and our expert team is here to offer tailored advice and technical support.

UK Sales

Contact dedicated UK sales and distributor support team.

HQ & Export Sales

Contact our UK head office and export sales team.

Technical Support

Contact our UK technical team for project or product advice or support.