UniGrip – Calibra Adjustable Under-Load Hanger

SKU # UG2-CAL

UniGrip Calibra is the precision-engineered suspension solution with built-in vertical adjustment and a quick-fit hook ideal for suspended services.

Safe Working Load

Safe Working Load:

120 lbs

Cable Compatibility

Cable Compatibility:

5/64"

Suspension Drop Lengths

Suspension Drop Lengths:

5 ft - 30 ft (custom lengths available on request)

Inquire now

Product Downloads

UniGrip Calibra - Technical Data Pack - USA
View all downloads
UniGrip – Calibra Adjustable Under-Load Hanger
SKU # UG2-CAL
1

Precision Suspension with Built-In Adjustability

UniGrip Calibra is designed for installers who demand flexibility and control. Featuring a pre-attached hook for rapid, tool-free connection to eyebolts or suspended equipment, Calibra simplifies even the most complex installations. Its standout feature? A unique built-in mechanism that allows up to 1.37″ (35 mm) of vertical adjustment while under load, making fine-tuning effortless and safe.  

Supplied in compact kits with pre-cut, fused cable and your choice of pre-attached end fixing, Calibra is ready to go straight from the box. Whether you’re suspending HVAC units or electrical containment, UniGrip Calibra delivers smarter, faster, and more precise suspension every time. 

Read More
Fine-tune with confidence

Fine-tune with confidence

UniGrip Calibra’s built-in mechanism allows up to 1.37" (35 mm) of vertical adjustment, even while under load—so you can make precise changes without disassembling

Fast, Tool-Free Connection

Fast, Tool-Free Connection

The pre-fitted hook enables instant attachment to eyebolts or suspended equipment, cutting down installation time.

Speed and Convenience

Speed and Convenience

UniGrip systems eliminate cutting, require minimal tools, and offer tool-free adjustment, making them quicker and easier to install than threaded rod or other methods–even for first-time users.

Technical and Engineering Support

Technical and Engineering Support

Our technical and engineering teams are available from start to finish to provide project engineering drawings, take-offs, on-site inspections, training, and support where needed.

Lockable Adjustment

Lockable Adjustment

Simple to use release button allows you to adjust drop height, and when you're done, just screw it down to lock in place and prevent tampering.

Improved Health and Safety

Improved Health and Safety

Our cable hanger kits minimize your time spent in the air or working with power tools, and eliminate the need for hot works permits, helping your teams work safer while staying complian

Fine-tune with confidence

Fine-tune with confidence

UniGrip Calibra’s built-in mechanism allows up to 1.37" (35 mm) of vertical adjustment, even while under load—so you can make precise changes without disassembling

Fast, Tool-Free Connection

Fast, Tool-Free Connection

The pre-fitted hook enables instant attachment to eyebolts or suspended equipment, cutting down installation time.

Speed and Convenience

Speed and Convenience

UniGrip systems eliminate cutting, require minimal tools, and offer tool-free adjustment, making them quicker and easier to install than threaded rod or other methods–even for first-time users.

Technical and Engineering Support

Technical and Engineering Support

Our technical and engineering teams are available from start to finish to provide project engineering drawings, take-offs, on-site inspections, training, and support where needed.

Lockable Adjustment

Lockable Adjustment

Simple to use release button allows you to adjust drop height, and when you're done, just screw it down to lock in place and prevent tampering.

Improved Health and Safety

Improved Health and Safety

Our cable hanger kits minimize your time spent in the air or working with power tools, and eliminate the need for hot works permits, helping your teams work safer while staying complian

How it works:

See how our UniGrip Calibra works below or download the Technical Data Pack for full installation guidance

 UniGrip Calibra – Technical Data Pack – USA
Step 1: Feed the cable into the entry channel at the top of the UniGrip and then back out of the other side
Step 2: This then grips and locks the cable in place
Step 3: Push down the end cap to allow adjustment up and down the cable
Step 4: Use the hook fixing to connect to your suspended service or item.
Step 5: Fine-tune your suspension height using the M8 thread and adjustment pillar until you reach the desired height.

Ready To Install
Suspension Kit

We supply UniGrip Calibra hangers as a ready to install suspension kit comprised of three parts

End Fixing Your Substrate Fixing
Wire Pre-cut and Fused Wire
Hanger Your Hanger
+

1 Substrate Fixing   (End Fixing)

All our suspension kits come with a wide range of substrate fixings designed to work with a variety of substrates and fixing points.
Discover which substrate fixings are available with this product below:

Loop

Ideal for looping around purlins, beams, roof trusses and other suitable building features

Available Sizes:
No. 1 : 1/16″
No. 2: 5/64″
No. 3: 1/8″
No. 4: 3/16″
No. 5: 1/4″

*System working load based on product and substrate fixing combined

View Attachment to Structure

Stud

For anchoring into concrete ceilings, metal decking and pressed metal.

Available Sizes:
No.1: 1/16″ (Cable Diameter)
No.2: 5/64″ (Cable Diameter)
No.3: 1/18″ (Cable Diameter)
No.4: 3/16″ (Cable Diameter)

*System working load based on product and substrate fixing combined

View Attachment to Structure

45° Eyelet

For attachment to a variety of substrates using suitable fixings.

Available Sizes:
No.2: 5/64″ (Cable Diameter)
No.3: 1/8″ (Cable Diameter)

*System working load based on product and substrate fixing combined

View Attachment to Structure

90° Eyelet

For fixing into concrete, steel or wood, using gas or power actuated tools, or appropriate screws.

Available Sizes:
No.1: 1/16″ (Cable Diameter)
No.2: 5/64″ (Cable Diameter)
No.3: 1/8″ (Cable Diameter)

*System working load based on product and substrate fixing combined

View Attachment to Structure

Concrete Ceiling Anchor

Ideal for fixing Gripple hangers into concrete by knocking into a pre-drilled hole. Pull with a claw hammer to set.

Available Sizes:
No.1: 1/16″ (Cable Diameter)
No.2: 5/64″ (Cable Diameter)

*System working load based on product and substrate fixing combined

View Attachment to Structure

Channel Nut

Designed specifically for use with channel, to suspend all types of building services.

Available Sizes:
No.2: 5/64″ (Cable Diameter)
No.3: 1/8″ (Cable Diameter)
No.4: 3/16″ (Cable Diameter)

*System working load based on product and substrate fixing combined

View Attachment to Structure

Shotfire

A shot-fired hanger solution with pre-mounted nail structural attachment, for securing installation into concrete or composite metal decking.

Available Sizes:
No.1: 1/16″ (Cable Diameter)
No.2: 5/64″ (Cable Diameter)

*System working load based on product and substrate fixing combined

View Attachment to Structure

Straight Eyelet

Suitable for a variety of applications that require bolting to brackets or fixtures.

Available Sizes:
No.1: 1/16″ (Cable Diameter)
No.2: 5/64″ (Cable Diameter)
No.3: 1/8″ (Cable Diameter)

*System working load based on product and substrate fixing combined

View Attachment to Structure

Toggle

For fastening through profile roof cladding, light fixtures and other cavities

Available Sizes:
No.1: 1/16″ (Cable Diameter)
No.2: 5/64″ (Cable Diameter)
No.3: 1/8″ (Cable Diameter)

*System working load based on product and substrate fixing combined

View Attachment to Structure

Top Hat

Aesthetic fixing for use with a wide range of Gripple hangers

Available Sizes:
No.1: 1/16″
No.2: 5/64″

*System working load based on product and substrate fixing combined

View Attachment to Structure

Barrel

Ideal for use on signage, or exposed services, such as retail and office environments.

Available Sizes:
No.1: 1/16″
No.2: 5/64″
No.3: 1/8″

*System working load based on product and substrate fixing combined

View Attachment to Structure
Snap Hook - 1 Snap Hook - 1

Snap Hook

Ideal for attachment to cable basket, purlin clips and light fixtures.

: 90 kg
Available Sizes:
No. 1: 1/16″
No. 2: 5/64″
No. 3: 1/8″

*System working load based on product and substrate fixing combined

View Attachment to Structure

2 Cable Length

From 5ft – 30ft

(Other lengths available on request)

All our ready-to-install suspension kits include pre-cut, looped, and fused cable in your chosen length. Standard options are available from 5ft – 30ft

3

UniGrip Calibra

Supplied hook fixing allows quick tool-free attachment to an eyebolt or hole on suspended equipment.

It is designed to allow for up to 1.37″ (35mm) of vertical adjustment under load using the built-in mechanism.

  • Max Working Load: 120 lbs
  • Cable Compatibility: 5/64″
  • Suspension Drop Lengths: 5 ft – 30 ft (custom lengths available on request)

Have you found what you are looking for?

Contact our Gripple experts for technical advice or project assistance or use our additional resources.

Speak To An ExpertGet Technical Support
1

UniGrip – Calibra

SKU # UG2-CAL

UniGrip Calibra is the precision-engineered suspension solution with built-in vertical adjustment and a quick-fit hook ideal for suspended services.

UniGrip Calibra is designed for installers who demand flexibility and control. Featuring a pre-fitted hook for rapid, tool-free connection to eyebolts or suspended equipment, Calibra simplifies even the most complex installations. Its standout feature? A unique inbuilt mechanism that allows up to 1.37″ (35 mm) of vertical adjustment while under load, making fine-tuning effortless and safe.

 

Key Specifications

Safe Working Load: 120 lbs
Cable Compatibility: 5/64″
Suspension Drop Lengths: 5 ft – 30 ft (custom lengths available on request)

Available Sizes

No. 2: 120 lbs
Find a SupplierView Product Page

Product Downloads

UniGrip Calibra – Technical Data Pack – USA

Found what you are looking for?

Contact our Gripple experts for technical advice or project assistance or find a local stockist.

Speak to an ExpertGet Technical Support

Common Applications

HVAC Equipment

Pipework

Cable Containment

Multi-Trade Racks

Exhibition Rigging

HVAC Equipment

Pipework

Cable Containment

Multi-Trade Racks

Exhibition Rigging

Downloads

UniGrip Calibra – Technical Data Pack – USA

Related Products and Accessories

HangPro®

Versatile Adjustable Cable Hanger

Safe Working Load: Up to 120 lbs
Safety Factor: 5:1
Cable Compatibility: 1/16″ and 5/64″
View Product

UniGrip – Standard

Cable Suspension for Slotted Channel or Strut

Max Working Load: 240 lbs
Cable Compatibility: 5/64″ and 1/8″
Suspension Drop Lengths: 5 – 30 ft (custom lengths available on request)
View Fixing Variant

UniGrip – QTUB (Quarter Turn)

Outer Hanger for Gripple Universal Bracket

Max Working Load: 240 lbs
Cable Compatibility: 5/64″ and 1/8″
Suspension Drop Lengths: 5 – 30 ft (custom lengths available on request)
View Fixing Variant

UniGrip – Hook

Hook Attachment Cable Hanger

Safe Working Load: 120 lbs
Cable Compatibility: 5/64″
Suspension Drop Lengths: 5 – 30 ft (custom lengths available on request)
View Fixing Variant

UniGrip – QT (Quarter Turn)

Inner Hanger for Gripple Universal Bracket

Max Working Load: 240 lbs
Cable Compatibility: 5/64″ and 1/8″
Suspension Drop Lengths: 5 – 30ft (additional lengths available on request)
View Fixing Variant

Find Where to Buy

Gripple products are available nationwide through our retail and distributor network.

Find Your Closest Distributor

Become a Distributor

Grow your business and expand your range by becoming a Gripple distributor.

Inquire Now

Contact the Gripple Experts

"*" indicates required fields

*
We’d love to stay in touch with info we think you’ll find useful?*

See our Privacy Policy here for more details.

Got a question or need help choosing the right products for your next project? Get in touch and our expert team is here to offer tailored advice and technical support.

Gripple Inc. USA Head Office

Contact our dedicated USA sales and head office team.

Gripple Inc. West Coast

Contact our West Coast sales office.