We use cookies and other technologies to allow us to improve our service to you. Continue browsing to accept. See our Cookie Policy for more information.

Accept Decline

Ailes de Modes Centre Eaton, Montreal, Quebec

Angel hangers were used on this renovation project for the suspension of track lighting. The Contractor chose Gripple as it offers an aesthetic look and fast installation time to help them meet the project deadline.

                     TIME SAVINGS
                        75 HOURS
LABOUR SAVINGS
$4,500
TOTAL SAVINGS
 $2,803.50
  • Building Type: Commercial
  • Consultant: Pageau Morel
  • Main Contractor: Brocollini
  • MEP Contractor: Britton Electrique
  • Building Structure: Concrete
  • Services: Track Lighting

This refurbishment project on the 30,000 sq.ft commercial property required a solution for hanging track lighting. In total there were 750 hanging points.

Traditionally threaded rod would be used but the Contractor wanted a more aesthetically pleasing solution and needed to install quickly to meet the project deadline. The Contractor liked the appearance of the cable on the hanging kit as it is straight when the tracks are hanging, unlike threaded rod which can be bent out of shape.

In addition to these benefits, the Contractor also liked the fact that Gripple solutions are easy to handle on-site. They are lightweight and are delivered in ready-to-use kits in boxes that are easy to store and move around the site.

The Angel hanger was chosen as the most suitable solution as it is designed especially for architectural lighting suspensions, signage, acoustic baffles and all other installations where aesthetics are important. The contemporary design complements the overall suspension and it has a variety of feet fixings to enable attachment to different fixing points.

“The main benefit of Gripple is that we do not need to stop production to cut material. I have one guy doing the hangers and another installing the Angel onto the tracks at ground level”

Francis Beauchamp, Foreman, Britton Electrique

  Gripple Solution Traditional Method
Overview AL1-SF14-LG-5FT-CWHQ 1/4” threaded rod, nuts, bolts, washers, separate anchors
Material cost $4,321.50 $2,625
Installation time 25 Hours  100 hours
Labour rate (per hour) $60 $60
Total labour cost $1,500 $6,000
Total cost $5,821.50 $8,625
Download
Tags: Building Services

Related Stories

Building Services
Hospital
11 December 2019
Building Services
New Academic Pavilion St-Jean Garrison (Electrical), St. Jean-sur-Richilieu, Quebec
11 December 2019

Featured Products

Why use Gripple?

  • Significant time and cost savings on your project
  • Complete, off-site solutions which minimize health and safety concerns
  • Innovative, patented solutions designed by an in-house team of engineers
  • Considerable reductions in packaging, vehicle movements & embodied CO2
  • A range of support services at every stage of your project, provided by our technical team.