Abraçadeira Rápida Universal Águas residuais

Ideal for use with the M8 Barrel end fixing for hanging various HVAC and electrical applications.

Easy-fit wood screw with integrated M8 thread connection.

The Beam, Flange & Purlin Clips are ideal for attaching Gripple hangers when access or drilling restrictions occur.

Lightweight tool that is ideal for applying regulated tension to horizontal catenary (CTI6 and EP6) installations.

Ideal for attaching a D6 or 3 mm catenary (CTI) kit from a concrete wall or wooden beam

Developed for the quick fastening of cable basket to Gripple Universal Brackets.

Handy ceiling clip solution for use when fixing into concrete substrates.

Screws into wood. Ideal for use with Loop end fixing.

Easy-fit slotted / hex head screw suitable for wood and non-cracked concrete.

Ring anchor, designed for use in concrete and other low-strength materials.

Easily fitted directly into concrete using an electric screwdriver

Developed for the quick fastening of cable tray to Gripple Universal Brackets, Fast Trak and G Brackets.

Aesthetic, snap-fit cover to protect the Gripple fastener from paint.

Punch-activated drop-in anchor for fixing into concrete and hollow core ceiling slabs.

Screw driver bit for use with Concrete Screw.

Punch to assist the secure and correct installation of Drop In Anchors

Available in various sizes, overall lengths and thread lengths for a variety of applications

Setting key with keyring attachment, for the adjustment of Gripple Hangers.

The G-Spacer allows the linking of two G-Brackets, with a distance of 300 mm to separate both electrical and data cables.

Ideal for clamping onto an I-Beam section from 6 mm to 19 mm flange thickness.

Versatile range of end fixings ideal for attaching directly to existing clips, brackets and light fittings.

Ideal for cutting wire rope construction 7x7 or 7x19 from diameter 1,5 mm up to 6 mm.

General purpose clip to support light fittings.

Ideal for fixings to luminaires, drop-in anchors and other products with a 6 mm, 8 mm or 10 mm hole.

Designed to lock quickly and securely into the re-entrant channel of decking profiles.

For use with hammer action drill to secure Drop-In Anchors.

For fast and secure fixing of Loop End Fixing

Plastic sleeve tubing for further reducing the risk of condensation.

Ideal for cutting wire rope construction 7x7 or 7x19 from diameter 1,5 mm up to 6 mm.

A plastic spreader band for attachment to 2 mm and 3 mm wire rope, for spreading the load of various suspended services.

The Spring clip is ideal for fixing to suspended services with 6 mm to 8 mm holes.

Ideal for use with the Stud end fixing for hanging various mechanical, HVAC and electrical applications.

M6 T-Bar Twist Clip for supporting fixings below the ceiling grid.

Ideal for cold room panels

The Twister secures the tail wire, making the installation completely safe and hazard free, it gives a tidy and neat finish.

Designed for use with Gripple Universal Brackets for fixing directly to steel I-Beams.

Accessory for use in lighting applications.

Fast and simple method for attaching to a variety of decking profiles.

Made from high tensile stainless steel, the Wire Anchor is easily fixed into concrete for attaching No. 1 and No. 2 hangers.

Improves ease of installation of Gripple Wire Anchors.