Angel™ Hanger – Mini Helix Suspension Solution for Acoustic Panels

SKU # AL 1-SHMX

Designed specifically for the fast and secure suspension of polyester fibre and PET acoustic panels.

Safe Working Load

Safe Working Load:

15 kg

Wire Size

Wire Size:

1.5 mm

Safety Factor

Safety Factor:

5:1

Enquire Now

Product Downloads

Angel Mini Helix Technical Data Pack - ENGLighting and Acoustics Brochure - ENG
View all downloads
Angel™ Hanger – Mini Helix Suspension Solution for Acoustic Panels
SKU # AL 1-SHMX
1
1
1
1
1

Angel™ Mini Helix – Seamless Suspension, Designed for Precision

Angel™ Mini Helix is a discreet suspension solution purpose-built for lightweight acoustic panels, particularly polyester fibre types.

Compact in design and pre-assembled for speed, it combines reliable acoustic suspension with clean aesthetics, ideal for offices, classrooms, studios, and open-ceiling environments where noise control meets design precision.

Secure Suspension

Secure Suspension

The Mini Helix screw drives directly into polyester fibre acoustic panels, creating a strong, reliable fixing point. It’s fully integrated into the pre-assembled kit, allowing immediate use with no need for extra components.

Effortless Insertion

Effortless Insertion

The hinged helix design acts as a built-in lever, tilting into position for smooth, one-step installation. This makes set-up faster and easier, especially in overhead or confined spaces with no tools required.

Fast & Flexible Installation

Fast & Flexible Installation

Supplied as a pre-wired kit with the helix already attached, Mini Helix saves time on site. The Angel device allows for one-handed height adjustment, while the swivel action helps avoid services and suits angled panels.

Engineered For Strength

Engineered For Strength

Despite its compact form, the Mini Helix supports up to 15 kg SWL with a 5:1 safety factor. Panels must be a minimum of 12 mm thick, ensuring a safe and secure suspension for a wide range of acoustic solutions.

Built for Real-World Use

Built for Real-World Use

Designed to perform in ambient conditions from –20 °C to +70 °C, Mini Helix suits a wide variety of environments. For high-heat or specialist applications, Technical Services can provide tailored advice.

Discreet, Clean Finish

Discreet, Clean Finish

Featuring a 1.5 mm pre-galvanised wire and a low-profile body, Mini Helix stays out of sight once installed. It’s ideal for modern interior spaces where visual clarity and minimal hardware are a design priority.

Secure Suspension

Secure Suspension

The Mini Helix screw drives directly into polyester fibre acoustic panels, creating a strong, reliable fixing point. It’s fully integrated into the pre-assembled kit, allowing immediate use with no need for extra components.

Effortless Insertion

Effortless Insertion

The hinged helix design acts as a built-in lever, tilting into position for smooth, one-step installation. This makes set-up faster and easier, especially in overhead or confined spaces with no tools required.

Fast & Flexible Installation

Fast & Flexible Installation

Supplied as a pre-wired kit with the helix already attached, Mini Helix saves time on site. The Angel device allows for one-handed height adjustment, while the swivel action helps avoid services and suits angled panels.

Engineered For Strength

Engineered For Strength

Despite its compact form, the Mini Helix supports up to 15 kg SWL with a 5:1 safety factor. Panels must be a minimum of 12 mm thick, ensuring a safe and secure suspension for a wide range of acoustic solutions.

Built for Real-World Use

Built for Real-World Use

Designed to perform in ambient conditions from –20 °C to +70 °C, Mini Helix suits a wide variety of environments. For high-heat or specialist applications, Technical Services can provide tailored advice.

Discreet, Clean Finish

Discreet, Clean Finish

Featuring a 1.5 mm pre-galvanised wire and a low-profile body, Mini Helix stays out of sight once installed. It’s ideal for modern interior spaces where visual clarity and minimal hardware are a design priority.

How to Install:

Our Angel Mini Helix Hanger is intuitive and easy to install. For full technical specification, download our technical data pack:

 Angel Mini Helix Technical Data Pack – ENG
Step 1: Using the Hanger body as a lever, twist the screw directly into the acoustic panel.
Step 2: With the hanger upright, feed the wire into the hole at the top of the hangar.
Step 3: Squeeze angel wings to adjust hanger height
Step 4: Repeat as necessary across the panel

Ready To Install
Suspension Kit

We supply Angel Mini Helix hangers as a ready to install suspension kit comprised of three parts.

End Fixing Your Substrate Fixing
Wire Your Pre-cut and Fused Wire
Hanger Your Hanger
+

1 Substrate Fixing   (End Fixing)

All our suspension kits come with a wide range of substrate fixings designed to work with a variety of substrates and fixing points.
Discover which substrate fixings are available with this product below:

Twist Clip

Ideal for hanging from suspended ceiling T-Bar, signage, acoustic baffles or luminaires.

Safe Working Load: Refer to hanger load ratings and safe working loads
Available Sizes:
No.1: 1.5 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing

90° Eyelet

For fixing into concrete, steel or wood, using gas or power actuated tools, or appropriate screws.

Safe Working Load: 110 kg
Available Sizes:
No.1: 1.5 mm (Wire Diameter)
No.2: 2 mm (Wire Diameter)
No.3: 3 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing

Loop

Hanger using a non-invasive, simple, choke knot technique

Safe Working Load: 325 kg
Available Sizes:
No. 1 : 1.5 mm
No. 2: 2.0 mm
No. 3: 3.00 mm
No. 4: 4.75 mm
No. 5: 6.00 mm

*System working load based on product and substrate fixing combined

View Substrate Fixing

Stud

Ideal for anchoring into concrete ceilings.

Safe Working Load: 250 kg
Available Sizes:
No.1: 1.5 mm (Wire Diameter)
No.2: 2 mm (Wire Diameter)
No.3: 3 mm (Wire Diameter)
No.4: 4.75 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing

Toggle

For fastening through profile roof cladding, light fittings and other cavities.

Safe Working Load: 110 kg
Available Sizes:
No.1: 1.5 mm (Wire Diameter)
No.2: 2 mm (Wire Diameter)
No.3: 3 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing

Straight Eyelet

Suitable for a variety of applications that require bolting to brackets or fixtures.

Safe Working Load: 110 kg
Available Sizes:
No.1: 1.5 mm (Wire Diameter)
No.2: 2 mm (Wire Diameter)
No.3: 3 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing

Shotfire

A shot-fired hanger solution with pre-mounted nail end fixing, for securing installation into concrete or composite metal decking.

Safe Working Load: 15 kg
Available Sizes:
No.1: 1.5 mm (Wire Diameter)
No.2: 2 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing

Ring Anchor

Set directly into cracked or non-cracked concrete with a hammer. Ideal for the fast suspension of services including electrical, HVAC and pipework.

Max Safe Working Load: 55 kg
Available Sizes:
No.1: 1.5 mm (Wire Diameter)
No.2 : 2 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing

Ceiling Anchor

Ideal for fixing Gripple hangers into concrete by knocking into a pre-drilled hole. Pull with a claw hammer to set.

Max Safe Working Load: 45 kg
Available Sizes:
No.1: 1.5 mm (Wire Diameter)
No.2: 2 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing
Snap Hook - 2

Mini Hook

Ideal for attachment to cable basket, purlin clips and light fittings.

Safe Working Load : 15 kg
Available Sizes:
No. 1: 1.5 mm

*System working load based on product and substrate fixing combined

View Substrate Fixing
Snap Hook - 1 Snap Hook - 1

Snap Hook

Ideal for attachment to cable basket, purlin clips and light fittings.

Safe Working Load: 90 kg
Available Sizes:
No. 1: 1.5 mm
No. 2: 2.0 mm
No. 3: 3.00 mm

*System working load based on product and substrate fixing combined

View Substrate Fixing
Snap Hook - 4 Snap Hook - 4

Barrel

Ideal for use on signage, or exposed services, such as retail and office environments.

Safe Working Load: 55 kg
Available Sizes:
No.1: 1.5 mm (Wire Diameter)
No.2: 2 mm (Wire Diameter)
No.3: 3 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing

Top Hat

Aesthetic fixing for use with a wide range of Gripple hangers

Safe Working Load: 55 kg
Available Sizes:
No.1: 1.5 mm (Wire Diameter)
No.2: 2 mm (Wire Diameter)

*System working load based on product and substrate fixing combined

View Substrate Fixing

2 Wire Length

From 1 – 10 m

(Other lengths available on request)

All our ready‑to‑install suspension kits include pre‑cut, looped, and fused wire in your chosen length. Standard options are available from 1 – 10 m.

3

Angel Mini Helix

Designed for precision and style, our Angel Hanger range offers a discreet, tool-free solution for single-point wire suspension across a wide range of applications. Angel Mini Helix suspension kits are designed specifically for the fast and secure suspension of polyester fiber and PET acoustic panels.

Max Working Load: 15 kg / 33 lb

Wire: Pre-galvanised, 7×7, 1/16” / 1.5mm diameter

Safety Factor: 5:1

Have you found what you are looking for?

Contact our Gripple experts for technical advice or project assistance or use our additional resources.

Speak To An ExpertGet Technical Support
1
1
1
1
1

Angel™ Hanger – Mini Helix

SKU # AL 1-SHMX

Designed specifically for the fast and secure suspension of polyester fibre and PET acoustic panels.

The Gripple Angel™ Helix Hanger is a sleek, low-profile suspension system designed for fast, secure installation of acoustic panels. The discreet solution can create the illusion of a floating acoustic ceiling.

Ideal for fibreglass and dense foam panels, the Helix locks in place with a simple twist using an Allen key, while the Angel mechanism allows for effortless height adjustment via a spring-loaded button.

The central wire exit variant supports multi-layer configurations, whilst the side exit variant is better suited to single-layer projects. With a 15 kg load rating, it’s built for performance and versatility and for peace of mind, the one-click safety feature reinforces its strength.

Additionally, pre-installation of the helix screw is possible at the point of, leaving just the Angel body to be installed on-site, streamlining workflows and reducing time on the project.

Key Specifications

Safe Working Load: 15 kg
Wire Size: 1.5 mm
Safety Factor: 5:1

Available Sizes

No. 1: 15 kg
Find a SupplierView Product Page

Product Downloads

Angel Mini Helix Technical Data Pack – ENGLighting and Acoustics Brochure – ENG

Found what you are looking for?

Contact our Gripple experts for technical advice or project assistance or find a local stockist.

Speak to an ExpertGet Technical Support

Applications

Acoustic Suspension

Acoustic Suspension

Related Products

Angel™ Hanger – Range

Aesthetic Architectural Wire Hanger

Safe Working Load: 15 kg
Range of Fixing Variants (Feet): 30+
Safety Factor: 5:1
View Product

Angel™ Hanger – Helix

Low Profile Hanger for Acoustic Panel Suspension

Safe Working Load: 15 kg
Compatibility: Ideal for panels made from fibreglass and dense foam (minimum thickness of 40 mm)
Versatile: Side and Central wire exit options available
View Fixing Variant

Catenary Kit (Indoor)

Overhead Wire Suspension Catenary

Safe Working Load: Up to 100 kg vertical load per free span
Available Wire Sizes: 3 mm, 6 mm
Attachment Methods: Wall Bracket, Loop, I-Beam Clamp
View Product
Core Products Assets & Collateral, Nature, Night, Outdoors Core Products Assets & Collateral, Nature, Night, Outdoors

HangFast™

Key Release Wire Locking Hanger

Safe Working Load: 325 kg
Wire Compatibility: 1.5 – 6 mm
Suspension Drop Lengths: 1 – 10 m (additional drop lengths available on request)
View Product

HangPro®

Versatile Adjustable Wire Hanger

Safe Working Load: Up to 55 kg
Safety Factor: 5:1
Wire Compatibility: 1.5 mm / 2 mm
View Product

Related Downloads

Angel Mini Helix Technical Data Pack – ENG
Angel Range – Technical Data Pack – ENG
Angel – CE Certificate
Angel, UniGrip, Direct Fix Clip, Collier Universal Certificate
Building Services Product Guide

Contact the Gripple Experts

Enquire Now

"*" indicates required fields

*
We’d love to stay in touch with info we think you’ll find useful?*

See our Privacy Policy here for more details.

Got a question or need help choosing the right products for your next project? Get in touch and our expert team is here to offer tailored advice and technical support.

UK Sales

Contact dedicated UK sales and distributor support team.

HQ & Export Sales

Contact our UK head office and export sales team.

Technical Support

Contact our UK technical team for project or product advice or support.