“Gripple products are in use in countless schools, universities, shopping centres, sports stadiums, hospitals, offices, factories and warehouses the world over, suspending cable containment, lighting and much, much more.”

“For modules of every kind, there’s a Gripple product to suit the job, reducing on-site work and minimising time from module arrival to completed installation.”

"Ducts and fan-coil units require a means of suspension that is not only quick and easy, but one that’s also safe, secure and approved. Gripple is that way.”

“Horizontal catenary systems can be used to hang all manner of services in places that would otherwise be impossible to reach, and they’re light on material too.”

Gripple Seismic Bracing Systems are specifically designed and engineered to brace and secure nonstructural equipment and components within a building or structure to minimize earthquake damage to suspended components.

"Perfect for retail, point of sale, leisure and corporate environments, our signage products ensure a clean appearance for the public face of any business."

The Gripple Stainless steel range is highly suited to areas with persistently elevated humidity and saturated atmospheres, including environments subjected to frequent cleansing and hygiene procedures.

“Being so much simpler to use than heavy, cumbersome rods, our hangers make short work of suspending laminated panels.”

Standard hanger is used to suspend a variety of mechanical and electrical services from different structures.

The Gripple Express is a fast locking solution for quick and easy suspension of signage, shopfitting display, HVAC, plumbing, cable containment and lighting.

Trapeze is a purpose-made single channel ideal for multi-tiered installations and for fast suspension of cable containment, air conditioning cassettes, rectangular ducts, chilled beams, etc.

The new Gripple Squeezelock range is designed for suspending all types of lighting and signage.

Catenary kits create secure, overhead spans by running high strength cables horizontally between two fixed points. Ideal for suspending M&E services, HVAC and signage.

“Engineered to suspend all types of pipework, radiant panels and chilled beams, Gripple products can be installed without the need for any preparation or additional tools, saving time and labour.”

Y-Fit is a single hanger with double haIdeal for cable tray, basket or luminaires.nging points, improves stability and centre of gravity.

Seismic & Wind restraint solutions for non-structural building components.

Fixing solutions, installation tools and decorative products for use with Gripple Hanger Kits, designed to make installation quicker and easier.

Each ready-to-use kit comes with an end fixing of your choice, ranging from the popular and versatile Loop, to more bespoke fixings designed for specific applications. We aim to provide a solution whatever the substrate.

A range of products that ensure a quick installation and the greatest tension for your trellis

The GPAK combines with the APAK to provide a complete anchoring solution, both above and below ground

Products that join and tension wire quickly, making light work of fence installations

The GPAK offers the key to an unwavering, long-life fence, and is installed in under 1 minute

The Jumbo was developed primarily for orchards, offering a 600kg working load

The GPAK Lockable provides an efficient yet simple means of securing your netting throughout your orchard

Range of products for bracing structures, supporting crops and hanging irrigation systems. One Gripple product can be used instead of many, and fitted in a fraction of the time. With our own manufacturing facilities, Gripple has the flexibility to provide bespoke solutions

A range of products that are not only wire joiners, but tensioners too, making installation simple, and up to five times faster than knotting. They are ideal for use in fencing, trellising and greenhouse applications.

The all-metal Contractor tool is strong, robust and built to withstand the everyday wear and tear associated with contracted work. With long, gear driven handles, the 10:1 mechanical advantage means you can apply the same tension, with much less effort.

Lightweight, hand-held, compact tool for tensioning wire quickly and accurately. The built in gearing system delivers up to 400kg of load with minimal effort, whilst the torqe gauge allows you to regulate tension, maximising the life of the wire.

The quick and easy alternative to tying-off all types of netting. The T-Clip is ideal for use on all types of stock fence, especially on horse fence where space is tight, or on barbed wire where tying is difficult. The simple twist and push action makes installation at least four times faster than knotting.

Underground anchor for quick installation into a variety of soils. This compact anchor is easy to transport and install, without compromise on the load ratings achieved by traditional screw anchors. The minimal ground disturbance created by installation means the anchor can be instantly loaded.

Pneumatic driver for installation of trellising posts and Anchors, for post diameters up to 80 mm. Hand-held and compact, the Thumpa is easier to use in hard to reach areas and reduces installation effort.

Bracing and anchoring solutions you can install in seconds. Comprising a pre-ferruled, pre-cut length of wire rope and a Gripple joiner these ready-to-use kits dramatically reduce installation time. Ideal for end-post anchoring or bracing.

The Dynamic combines push-fit technology with a one-step lock to create a fast, easy and secure method to anchor or brace structures. Replacing fiddly, multiple u-bolts, the Dynamic can be installed in under 1 minute.

Single channel product for use with metal end posts or in greenhouse structures. Engineered with one channel, the GP No.1 and 2 butt up against an end post or a structure. For use on steel wire, monofilament (nylon) wire and cable (wire rope).

For joining mild steel and high tensile barbed wire. Ideal for installation and repair, and up to five times faster than knotting. The Barbed is fitted with ceramic rollers for optimum corrosion resistance.

The product for high load applications, such as apple trellising and crop wire support in greenhouses. Specifically designed for orchard trellising, the Jumbo is fitted with larger ceramic rollers and has a heavy duty housing. The 600 kg rating ensure it can support heavy crops and longer row lengths.

For bracing and anchoring in dynamic environments, the Lockable comes complete with locking screws to clamp the wedge in position and secure high loads. Use for bracing high load trellis, overhead structures, protective netting or shade cloth.

Range of products for bracing structures, supporting crops and hanging irrigation systems. One Gripple product can be used instead of many, and fitted in a fraction of the time. With our own manufacturing facilities, Gripple has the flexibility to provide bespoke solutions

A simple, fast way to secure your trellis wires to concrete end posts. The ingenious ‘collar’ holds the wire in position, allowing installation and tensioning in just 30 seconds, making it the fastest method on the market today. There is no twisting, no knotting, no tools and best of all, one kit fits all sizes of post.

Lightweight and portable petrol powered driver for the installation of anchors and trellis posts.

Handy accessories to aid installation and create a neat, professional finish. Twister to secure tail wires and protect from injuryWire cutters to cut wire up to 4 mm with ease. Workbelt for storing all your products and keeping them to hand. Setting key for repositioning all Gripple Plus products.